Skip to main content
Search Button
Librairie Kobo Canada Cartes cadeau Aide
Kobo Rakuten
Ma liste d'envies

Panier

Vous profitez des avantages réservés aux VIP !

Article(s) non disponible(s) à la vente
Veuillez vérifier votre panier. Vous pouvez supprimer le ou les articles qui ne sont pas disponibles maintenant ou nous les supprimerons automatiquement au moment du règlement de la commande.
articlesarticle
articlesarticle

Recommandé pour vous

Loading...


Engineering (R0) Série de Livres électroniques

1-12 sur 12 résultats
Skip side bar filters

  • Round-Robin Test on Creep Behaviour in Cracked Sections of FRC: Experimental Program, Results and Database Analysis

    State-of-the-Art Report of the RILEM TC 261-CCF

    Modifié par Aitor Llano-Torre, Pedro Serna ...
    Collections series Engineering (R0)
    The book presents the work of the RILEM Technical Committee 261-CCF, which organized the challenging International Round Robin Test (RRT) on the creep behaviour of Fibre Reinforce Concrete (FRC) cracked specimens. Although different creep test methodologies have been developed in recent years, the absence of a standardised creep methodology hindered general comparisons. Therefore, the RILEM TC 261 ... En savoir plus

    $102.99 CAD

Les lecteurs de ce roman ont aussi aimé

  • Solid/Liquid Separation: Equipment Selection and Process Design

    par Steve Tarleton, Richard Wakeman ...
    In this volume, the third in a set specifically written for the industrial process and chemical engineer, the authors provide the detailed information on filtration equipment and media which allows the reader to then consider the pre-treatment of suspensions, selection of the most appropriate equipment for the task, data analysis and the subsequent design of the processes involved for particular ... En savoir plus

    $287.99 CAD

  • A Guide to Additive Manufacturing

    Modifié par Damir Godec, Joamin Gonzalez-Gutierrez, Axel Nordin, Eujin Pei, Julia Ureña Alcázar ...
    Collections series Engineering (R0)
    This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an introduction to AM technologies and the general workflow, as well as an overview of the current standards within AM. In the following chapter, a more in ... En savoir plus

    Gratuit

  • Non-Destructive Testing in Civil Engineering 2000

    par T. Uomoto ...
    The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been ... En savoir plus

    $375.99 CAD

  • Principles of Tropical Air Conditioning

    par Chris A. Ibe, Emmanuel E. Anyanwu ...
    Principles of Tropical Air Conditioning is written with the humid tropics in mind. It is intended to meet the syllabus of the Higher National Diploma (HND) or equivalent professional examinations in Building Services Engineering. It is also designed to cover the air conditioning course content of the new Bachelor of Engineering (B. Eng) degree approved by the National Universities Commission. It ... En savoir plus

    $6.99 CAD

  • Advanced Composite Materials for Automotive Applications

    Structural Integrity and Crashworthiness

    par Ahmed Elmarakbi ...
    Collections series Automotive Series
    The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly ... En savoir plus

    $159.99 CAD

  • Adhesive Bonding of Aircraft Composite Structures

    Non-destructive Testing and Quality Assurance Concepts

    Modifié par Welchy Leite Cavalcanti, Kai Brune, Michael Noeske, Konstantinos Tserpes, Wiesław M. Ostachowicz, Mareike Schlag ...
    Collections series Chemistry and Material Science (R0)
    This book is open access under a CC BY 4.0 license. It presents the results of the ComBoNDT European project, which aimed at the development of more secure, time- and cost-saving extended non-destructive inspection tools for carbon fiber reinforced plastics, adhered surfaces and bonded joints. The book reports the optimal use of composite materials to allow weight savings, reduction in fuel ... En savoir plus

    Gratuit

  • Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry

    Modifié par Mahmood Aliofkhazraei, Abdel Salam Hamdy Makhlouf ...
    Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, ... En savoir plus

    $176.79 CAD

  • Plastics Process Analysis, Instrumentation, and Control

    Modifié par Johannes Karl Fink ...
    This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry.Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a dependence of the previous time, ... En savoir plus

    $252.99 CAD

  • Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures

    State-of-the-Art Report of the RILEM Technical Committee 239-MCM

    Modifié par Masayasu Ohtsu ...
    Collections series Engineering (R0)
    The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. This volume, in which on-site measurements of concrete ... En savoir plus

    $115.99 CAD

  • Innovative Materials and Techniques in Concrete Construction

    ACES Workshop

    Modifié par Michael N. Fardis ...
    Collections series Springer Nature Proceedings excluding Computer Science
    Recent years have seen enormous advances in the technology of concrete as a material, through which its strength, compactness and ductility can reach levels never dreamed of before. Thanks to these improved material properties, the strength and durability of concrete structures is greatly improved, their weight and dimensions reduced, the scope of concrete as a structural material is widened and – ... En savoir plus

    $256.19 CAD

  • Non-Destructive Assessment of Concrete Structures: Reliability and Limits of Single and Combined Techniques

    State-of-the-Art Report of the RILEM Technical Committee 207-INR

    Modifié par Denys Breysse ...
    Collections Livre 1 - RILEM State-of-the-Art Reports
    This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities ... En savoir plus

    $179.39 CAD